Installation Support
Install With the Right Preparation
Review fitment, parts, wiring, and basic testing steps before installing your vehicle-specific infotainment system.Before Installation
Check fitment, parts, and wiring first.
Do not cut wires or force connectors. Test key functions before final mounting.Check Fitment First
Confirm year, model, screen size, and dashboard layout before installation.
Inspect All Parts
Verify screen, frame, harnesses, modules, cables, brackets, and accessories.
Professional Install Recommended
Use a qualified installer if you are not familiar with vehicle electronics.
Send Photos for Support
For help, send dashboard photos, connector photos, order number, and a short video.
Before You Start
Installation Preparation
Follow these basic checks before removing the factory unit.Confirm Fitment
Check year, model, trim, factory screen size, and original system.
Inspect Parts
Confirm screen, frame, harnesses, modules, cables, and accessories.
Take Photos First
Photo the dashboard, original screen, wiring, and connectors.
Protect Dashboard
Use proper trim tools to avoid scratches or broken clips.
Power Safety
Disconnect battery if required by installer or vehicle procedure.
Do Not Cut Wires
Do not cut, splice, or modify wiring unless instructed.
Installation Flow
Recommended setup process.
Remove Trim
Carefully remove dashboard trim and factory screen or radio unit.
Connect Harnesses
Match supplied harnesses and modules to your vehicle configuration.
Test First
Test screen, sound, camera, controls, CarPlay, and main functions.
Final Mounting
Secure the screen, reinstall trim panels, and complete system setup.
After Installation
Check these key functions.
Professional Installation Is Recommended
Use professional installation if you are not familiar with dashboard removal, wiring harnesses, vehicle electronics, OEM integration modules, camera, or audio troubleshooting.